• Language
  • Contact
  • My Cart
  • Sign in
Get Mechanical Drawing
ATS-3012-C5-R0-EXPLODED
*Image above is for illustration purpose only..
41.0 x 45.0 x 10.0 mm  BGA Heat Sink - High Performance Push Pin
Heat Sink
Product Details
  • ATS-1041-C3-R0
  • 41.0 x 45.0 x 10.0 mm  BGA Heat Sink - High Performance Push Pin
  • N/A
  • maxiFLOW
  • PEM standoff with compression screws
  • Recommended through hole size in PCB is 3.00 mm
  • See detail
  • See detail
Specifications
  • For larger heat sinks and higher pre-loads, push pins with compression springs are an effective mounting choice. The push pin has a flexible barb at the end that is designed to engage with a pre-drilled hole in a PWB. The compression spring adds the necessary force to hold the assembly together. Provides better thermal performance than comparable size straight fin and pin fin heat sinks.
  • Features proven high performance maxiFLOW™ heat sink spread fin array to maximize cooling surfaces.
  • Ideal for tight spaced components where wider heat sinks cannot be used
  • Provided with pre-assembled thermal interface material centered on base.
  • PEM Standoff with Compression Screws
Product Details
Part Number Lifecycle Status Length
(mm)		 Width
(mm)		 Height
(mm)		 Fin Tip to Fin Tip
(mm)		 TIM FINISH
ATS-1041-C3-R0 ACTIVE 41.0 45.0 10.0 57.3 T766 Green Anodized
Thermal Performance
Schematic Image. AIR VELOCITY THERMAL RESISTANCE
FT/MIN M/S °C/W Unducted Flow °C/W Ducted Flow

*Image above is for illustration purpose only.
A: Length B: Width C: Height D : Fin Tip to Fin Tip. 		100 0.5 N/A N/A
200 1.0 N/A 0.0
300 1.5 3.9 N/A
400 2.0 N/A N/A
500 2.5 N/A N/A
600 3.0 N/A N/A
700 3.5 N/A N/A
800 4.0 N/A N/A
  • Length and width dimensions refer to the size of the component. Dimensions of the heat sink are subject to tolerances of up to .99 mm in order to accommodate the clip assembly
  • Thermal performance data are provided for reference only. Actual performance may vary by application
  • ATS reserves the right to update or change its products without notice to improve the design or performance
  • Additional tooling fees may be required
  • Typical lead time is a minimum of 4-6 weeks
  • Contact ATS to learn about custom options available

ATS-1041-C3-R0   (Data Sheet)
41.0 x 45.0 x 10.0 mm  BGA Heat Sink - High Performance Push Pin		 download data sheet
ATS-1041-C3-R0
Mechanical Drawing - FUSED MODEL (used for Form and Fit use) 		download fused Model for Form and Fit use
superGRIP™
Installation & Removal		 download data sheet
superGRIP™
Clearance Guidelines		 download data sheet
ATS-maxiGRIP
Installation Guidelines		 download data sheet
ATS-maxiGRIP
Clearance Guidelines		 download data sheet
RoHS
Obtain RoHS Certificate		 download data sheet