ATS Products

CLWT-067™

Closed Loop Wind Tunnel

The CLWT-067™ is a research-quality closed loop wind tunnel that provides a convenient, accurate system for thermally characterizing PCBs and individual components at controlled temperatures from ambient to 85°C.

The CLWT-067™ wind tunnel produces air flows up to 7 m/s (1,400 ft/min). With customization, it can generate flows up to 50 m/s (10,000 ft/min) using orifice plates (available optionally). The clear Lexan test section lets the user view the test specimen and allows for flow visualization.

Unlike open loop wind tunnels, the CLWT-067™ recirculates internal air. This allows the system heater to quickly warm the air to a specific temperature. The testing of boards and components in hot air is a requirement in some NEBS and other standards. The precise controls and temperature range of the CLWT-067™ wind tunnel allow its use for testing heat sink performance and for calibrating air and temperature sensors.

The complete wind tunnel fits on most lab benches and is powered from standard AC outlets. It has a smaller footprint than traditional, closed loop wind tunnels or environmental test chambers.

The wind tunnel’s test section can be accessed from the top door for mounting and repositioning of boards, components and sensors. Optional internal rail guides provide an easy mechanism to install test specimens of different sizes (e.g., PCB, heat sink). Instrument ports (6) are provided in the side walls of the test section for placing temperature and velocity sensors, such as thermocouples, Pitot tubes and hotwire anemometers.

Custom options are also available. Contact ATS for details.

Product Specifications
  • Overall Dimensions (L x W x D): 143.6 x 49.3 x 67.7 cm (56.5 x 19.4 x 26.6")
  • Test Section Dimensions (L x W x H) 43.1 x 25.0 x 8.9 (inside wall to wall) cm (16.9 x 9.8 x 3.5")
  • Number of Sensor Ports: 6
  • Air Flow Range: 1 to 7m/s (200 to 1400 ft/min)
  • Flow Uniformity: +/- 1%
  • Temperature Range: Up to 85ºC (185ºF)
  • Temperature Uniformity: +/- 1ºC
  • Power: 220VAC at 20 Amps
  • Weight: 70.7 Kg (156 lbs)
  • Materials: Aluminum, Plexiglas & Stainless Steel
Applications
  • High Temperature Testing
  • Component Testing
  • Heat Sink Characterization
  • Accurate Sensor Calibration
  • Aerodynamic and Pressure Drop Measurement
  • Multiple PCB Testing
Additional Features
  • Design allows for quick access to the test section
  • Smaller carbon footprint than other closed loop wind tunnels
  • High quality flow with very little turbulence
  • Recirculates air, allowing the air to quickly warm. Elevated temperature testing is a requirement in certain NEBS standards.
Product and How To Videos
  • The families of ATS thermal test instruments for the electronics industry.
Instrument Product Family