• Language
  • Contact
  • My Cart
  • Sign in
ATS Products
Get Mechanical Drawing
ATS-3012-C5-R0-EXPLODED
*Image above is for illustration purpose only..
ATS-LQHS-84025-C1-R0
Liquid Cooled Heat Sinks
  • ATS-LQHS-84025-C1-R0
  • 84.00 x 84.00 Heat Sink in heights of 25.8mm
    High Performance Liquid Cooled fanSINK™ with Push Pin Attachment
  • fanSINK, liquid cooled, (fan not included)
  • Download PDF
  • See detail
  • See detail

FEATURES AND BENEFITS

  • Thermal performance is at least 3x better than the exact same size fanSINK without the liquid loop.
  • Integrated HEX, hence, the liquid loop may require one less component.
  • Stainless steel screw fan attachment ensures dependable long-term fan to heat sink assembly. 4-40 thread screws are supplied in 4 lengths (1/2", 3/4", 7/8", 1").
  • Fan assembly hole pattern is 61.5 mm C-C (center to center)
  • Screw PEM push pin attachment included
  • Includes Thermal Interface Material (TIM) centered on base.
  • Recommended through hole size in PCB is 3.00 mm
  • Fluid Types: Water, Propylene Glycol, Refrigerants, Dielectrics, Mineral Oil, EG Mixtures
Product Details
ATS LQHS 84000 Series Thermal Resistance With Orion Fan OD7020-12HHB10A
Part Number Lifecycle
Status		 Dimension (mm) TIM Finish Total
Thermal Resistance
(°C/W) 		Flow Rate
LPM(GPM) 1.9(0.5) 		Flow Rate
LPM(GPM) 3.7(1.0) 		Flow Rate
LPM(GPM) 5.7(1.5) 		Flow Rate
LPM(GPM) 7.6(2.0)
Length Width Height R
(°C/W)		 dP
kPA (psi)		 R
(°C/W)		 dP
kPA (psi)		 R
(°C/W)		 dP
kPA (psi)		 R
(°C/W)		 dP
kPA (psi)
ATS-LQHS-84025-C1-R0 ACTIVE 84.0 84.0 25.8 Chomerics T766 Black 0.06 0.06 10.00 (1.45) 0.05 36.00 (5.22) 0.05 77.00 (11.17) 0.05 134.00 (19.43)
Thermal Performance
Schematic Image Thermal Resistance
Flow Rate
LPM(GPM) 		R
(°C/W) 		dP
kPA (psi)

*Image above is for illustration purpose only. 		1.9(0.5) 0.06 10.00 (1.45)
3.7(1.0) 0.05 36.00 (5.22)
5.7(1.5) 0.05 77.00 (11.17)
7.6(2.0) 0.05 134.00 (19.43)
ATS-LQHS-84025-C1-R0    (Data Sheet)
download data sheet
ATS-LQHS-84025-C1-R0
Mechanical Drawing - FUSED MODEL (used for Form and Fit use) 		download fused Model for Form and Fit use
RoHS & REACH Certificate download data sheet
Complete Your Liquid Loop with ATS

ATS has the products needed to design a complete liquid cooling loop : iCDMs (Industrial Cooling Distribution Modules), Tubed and High Performance Cold Plates to transfer and remove the heat from the source; Heat Exchangers to transfer heat from the liquid to the air with or without a fan; Chillers to circulate and condition the fluid in the system, Compact Refrigeration Modules for very high capacity cooling. In addition , ATS offers Flow Meters to measure the volumetric flow rate of the fluid in the system and Leak Detectors to notify users of any leaks in the system.