• Language
  • Contact
  • My Cart
  • Sign in
ATS Products
Get Mechanical Drawing
ATS-3012-C5-R0-EXPLODED
*Image above is for illustration purpose only..
ATS-TCP-1001
Tubed Cold Plates
ATS-TCP-1001
  • Cost effective thermal management solution for component cooling where the heat load is low to moderate
  • Compatible with industry accepted coolants
  • The cold plate base the copper tubes press into is made of aluminum 6063
  • Copper tubed cold plates are attached to the base plate with a thin film of high thermal conductivity epoxy for secure tube attachment.
  • Stainless steel tubed cold plates are SS 304/316 and feature tubing secured between two plates
  • Supplied with secure, 3/8“ push-to-connect tube fittings for a tight connection between the cold plate and inlet and outlet tubing. Tube outer diameter is 3/8“ (9.525 mm).
  • Maximum pressure: 200 psi
  • Plastic tubing connecting to our Cold Plate fitting has to be at least 90 durometer Shore A scale
Product Details
Part Number Lifecycle
Status		 Plate Dimension (mm) Overall
Length
(mm) 		# No
of Tube
Pass 		Tube
Material 		Flow Rate
LPM(GPM) 1.9(0.5) 		Flow Rate
LPM(GPM) 3.7(1.0) 		Flow Rate
LPM(GPM) 5.7(1.5) 		Flow Rate
LPM(GPM) 7.6(2.0)
Length Width Height R
(°C/W)		 dP
kPA (psi)		 R
(°C/W)		 dP
kPA (psi)		 R
(°C/W)		 dP
kPA (psi)		 R
(°C/W)		 dP
kPA (psi)
ATS-TCP-1001 ACTIVE 152.0 127.0 15.0 229 4 Copper 0.021 3.58 (0.52) 0.016 10.82 (1.57) 0.013 21.16 (3.07) 0.012 35.16 (5.10)
Thermal Performance
Schematic Image Thermal Resistance
Flow Rate
LPM(GPM) 		R
(°C/W) 		dP
kPA (psi)

*Image above is for illustration purpose only. 		1.9(0.5) 0.021 3.58 (0.52)
3.7(1.0) 0.016 10.82 (1.57)
5.7(1.5) 0.013 21.16 (3.07)
7.6(2.0) 0.012 35.16 (5.10)
ATS-TCP-1001    (Data Sheet)
download data sheet
ATS-TCP-1001
Mechanical Drawing - FUSED MODEL (used for Form and Fit use) 		download fused Model for Form and Fit use
RoHS & REACH Certificate download data sheet
Complete Your Liquid Loop with ATS

ATS has the products needed to design a complete liquid cooling loop : iCDMs (Industrial Cooling Distribution Modules), Tubed and High Performance Cold Plates to transfer and remove the heat from the source; Heat Exchangers to transfer heat from the liquid to the air with or without a fan; Chillers to circulate and condition the fluid in the system, Compact Refrigeration Modules for very high capacity cooling. In addition , ATS offers Flow Meters to measure the volumetric flow rate of the fluid in the system and Leak Detectors to notify users of any leaks in the system.