The DIY (“Do It Yourself”) family of high-performance cold plates provides engineers
with the freedom to drill holes to match the specific connection points of the devices being cooled such as IGBT, MOSFET,
or other power electronics. Each cold plate has an etched “no drill zone” to provide a visual guide.
Outside of the “no drill zone,” through holes can be drilled at any point. (Avoid drilling into the I/O ports.)
Inside the “no drill zone” holes can only be drilled to a depth of 6 mm to avoid damaging the internal fin field.
(See explanatory graphic below).
All ATS standard IGBT cold plates have unmatched thermal performance because of their mini-channel fin design.
The ATS-CP-1001-DIY has the same thermal performance as the ATS-CP-1001., at a flow rate of 4 L/min, can transfer 1kW of heat at 5°C temperature difference between the cold plate base and inlet fluid temperature. If the coolant has particles, a #60 filter or finer is recommended to remove possible particles in the liquid.
Customization is available. ATS can design cold plates to meet size restrictions and manufacture cold plates to connect with a variety of components include FEATURES AND BENEFITS
- Dimensions in mm (L x W x H): 198 x 147 x 20
- Material: Aluminum (Unfinished)
- Weight: 1,340 grams
- More than 30% improvement in thermal performance compared to commercially-available cold plates
- Compatible with industry accepted coolants
- 1/4 (pipe size) – 18 (thread density) NPT threaded input and output
- Low pressure drop characteristics
- Lightweight for ease of use
- Provides uniform cold plate surface temperature when IGBTs are installed
- Maximum Pressure: 60 psi
- Customizable to fit different devices