• Language
  • Contact
  • My Cart
  • Sign in
ATS Products
TEChill-2100A
Check Stock & Buy Now Download Instructional Manual Product Training Module Download Software and Calibration File Frequently Asked Questions ?
Download Portal

TEChill-2100A

The TEChill-2100A chiller and heater system is based on Thermoelectric devices (Peltier, TEC) that provide precision heating and cooling of the fluid medium. TECs are semiconductor refrigerators and heaters that have no moving parts. This eliminates the kinds of failures associated with vapor compression for refrigeration.

Features

  • Precise temperature control for heating and cooling
  • Environmentally friendly
  • Localized heating and cooling once attached to a cold plate
  • Fast temperature response for both heating and cooling
  • Low noise and vibration
  • Leak free, stainless steel fittings
  • Compact and portable – system rides on lockable casters

Applications

  • Medical chillers & heaters
  • Water chillers & heaters
  • Food & beverage
  • Laser cooling
  • X-Ray systems
  • Laboratory testing of cell-biology
  • Medical equipment
  • Analytical equipment
  • Defense & aerospace
  • Semiconductor & equipment

TEChill-1400A

W3Schools.com

Product Specifications

  • Cooling capacity: 2.1 kW
  • Cooling mode range: 5 to 75°C (41 to 167°F)
  • Heating mode limit: up to 75°C (158°F)
  • Pump pressure head (maximum):11 ft (3.3 m), 4.7 psi (32.8 Kpa)
  • Pump flow rate (maximum): 3.79 L/Min (1 GPM)
  • Water tank capacity: 2 L / (1/2 gal.)
  • Fluid loop attach: 1/2 Inch NPT, stainless steel
  • Input power: 180 to 264 VAC
  • Power input current: 16-20 A
  • Frequency range: 47 to 63 HZ
  • Operating temp range: -40°C to 85°C (41 to 122°F)
  • Operating humidity range: 20 to 90% RH
  • Temperature stability: + / - 1 °C
  • Storage temperature: -40 to +85°C (-40 to 185°F)
  • Storage humidity:10 to 95%
  • Dimensions: 40.1 x 73.7 x 57.0 cm (15.7 x 29.0 x 22.4 in)
  • Weight: 40 kg (88.2 lbs)
  • Wetted materials: Aluminum, epdm, stainless steel, polycarbonate, polypropylene, polyurethane, nylon 11, santoprene
Complete Your Liquid Loop with ATS

ATS has the products needed to design a complete liquid cooling loop : iCDMs (Industrial Cooling Distribution Modules), Tubed and High Performance Cold Plates to transfer and remove the heat from the source; Heat Exchangers to transfer heat from the liquid to the air with or without a fan; Chillers to circulate and condition the fluid in the system, Compact Refrigeration Modules for very high capacity cooling. In addition , ATS offers Flow Meters to measure the volumetric flow rate of the fluid in the system and Leak Detectors to notify users of any leaks in the system.